DNA — THE TUBE · Airtight Container for Herbs & Spices
DNA mark
DNA
Devil Needs Another
You must be 18 or older to enter.
ACCESS IS RESERVED FOR ADULTS.
AN AIRTIGHT CONTAINER FOR HERBS & SPICES · EN / IT
DNADevil Needs Another
EN IT
Configure
THE TUBE in darkness
DNA mark
DNA
Devil Needs Another
THE TUBE, lying, in darkness
DNA mark
DNA
Devil Needs Another
The five pieces of THE TUBE

Five pieces.
One object.

Each printed as a single monolithic part

CAP — 01
BODY — DUAL CHAMBER
CAP — 02
FUNNEL TUBE — SIDE BLADE
SPOON — ORGANIC BOWL
EXPLODED VIEW · SCROLL-LINKED SEQUENCE IN PRODUCTION
Section A–A

Two chambers.
One seal.

Two independent compartments keep contents separate and protected. Each closes with a quarter-turn bayonet that magnets set home with a quiet click — metal seating on metal, engineered for an airtight seal with no gasket to age.

2
CHAMBERS
0
GASKETS
90°
QUARTER TURN
The crown, from above
PLATE 04 · THE CROWN
The cap, bayonet in profile
PLATE 05 · THE BAYONET
Open, the chamber
PLATE 06 · THE CHAMBER
Ø 21.5 · 74.7
How it works

Press. Turn.
Click.

Align the lugs with the entry windows, press, and turn ninety degrees to the stop. The bayonet track is printed into the metal.

The last millimetre is not yours. Two recessed magnets — one in the cap, one in the body — find each other and set the cap into its metal-to-metal seat with a quiet, definite click.

Four nickel-plated NdFeB rings in all, two per joint. Their pockets and a solid divider keep them away from either chamber, and from the contents.

No spring, no clip, no gasket. One gesture in, the same gesture out. We call it the 90° Click.

BODY
AISI 316L · SLM · Ø21.5 × 74.7 MM CLOSED
WEIGHT
≈96 G KIT, MAGNETS INCLUDED · TITANIUM ≈56 G
CHAMBER A
3.0 CM³ NET · ISOLATED, SOLID DIVIDER
TOOLS
FUNNEL Ø4.4, Ø2.8 BORE · SCOOP 40.5 MM
CLOSURE
BAYONET 90° × 2 · 4× NdFeB N35, RECESSED
FINISH
AS CONFIGURED
ANIMATION COMING SOON
THE 90° CLICK
True proportion

Sized for real life.

It takes the space of a lipstick and carries like a fine pen. A Ø21.5 × 74.7 mm cylinder — at home in a handbag, a jacket, a pocket.

Ø 21.5 MM · 74.7 MM · ≈ 96 G
TRUE PROPORTION · 1:1
74.7
Ø 21.5
LIPSTICK
THE TUBE
≈ 96 G
FOUNTAIN PEN
DNA-ST-001 · SCALE COMPARISON
Dimensioned view of THE TUBE
Additive manufacture

The bayonet is not machined.
It's printed.

74.7 mm
Ø 21.5
CLOSURE
QUARTER-TURN BAYONET · MAGNETIC SEAT
MATERIAL
316L STAINLESS · Ti6Al4V TITANIUM
PROCESS
SLM — LASER POWDER-BED FUSION
FINISH
ELECTROPOLISHED
DNA-ST-001 · SHEET 1/6

Grown from powder.
Finished by hand.

THE TUBE
TECHNICAL PLATE · 1:1

Every body begins as powder — 316L or titanium, fused layer upon layer in the focus of a laser. The bayonet is grown with the part, never cut into it: tracks, stops and lugs printed in place, and, as far as we know, the only container of its kind closed by a printed quarter-turn in metal.

Then the machines stop. The double helix stands in relief on the surface; when lacquer is chosen, gold or bronze is settled into its recesses by hand — one piece at a time, under a loupe. No two marks dry the same.

Numbered, engraved, released in small drops — not because scarcity is a strategy, but because this is the pace at which the standard survives.

74.7
Ø 21.5
BAYONET
QUARTER TURN · PRINTED
MONOLITHIC BODY
NO JOINTS · NO WELDS
TECHNICAL PLATES · DWG v7.3
SCROLL ▸ · DIMENSIONS WITHHELD
Plate — general assembly
SHEET 1 · GENERAL ASSEMBLY — FIVE PIECES, ONE ARCHITECTURE
Plate — body section
SHEET 2 · BODY — LONGITUDINAL SECTION, TWIN CHAMBERS
Plate — caps, magnet pockets
SHEET 3 · CAPS A & B — MAGNET POCKETS, CROWN MARK
Plate — bayonet closure
SHEET 4 · CANONICAL BAYONET — ENTRIES, TRACKS, STOPS
Plate — funnel tube
SHEET 5 · FUNNEL TUBE — THROUGH-BORE, ASYMMETRIC BLADE
Plate — spoon
SHEET 6 · SPOON — FREE-FLOATING TAMPER, ORGANIC BOWL
OBJECT
THE TUBE · DNA-ST-001
MATERIAL
316L / Ti6Al4V
PROCESS
SLM · ELECTROPOLISHED
SHEET
1 / 6
THE TUBE, polished, emerging from darkness
The object

Steel, drawn
out of the dark.

Electropolished to a mirror, weighted like an instrument. It holds the light, and gives almost none of it back.

Detail — the funnel tube and spoon
DETAIL · THE INSTRUMENTS
Funnel & spoon

Two tools, made to match.

A funnel tube with a Ø2.8 through-bore and an asymmetric side blade, and a scoop with an organic bowl that rides free by design. They share the tool chamber, held to the same standard as the case that carries them.

Ø2.8
THROUGH-BORE
316L
/ Ti6Al4V
Macro of the double-helix mark, gold lacquer in relief
The mark

Lacquer, set by hand.

The double helix rises from the metal in relief. On request, gold or bronze lacquer is settled into its recesses by hand — one piece at a time, no two identical.

GOLD · BRONZE · OR BARE RELIEF
At ground level, helix forward
The base, helix forward
The set, recumbent
At rest

An object that waits well.

Nº 017

Limited. Numbered.

Each drop is a limited, numbered series. Its number is engraved into the piece. The waitlist grants priority access and early-access pricing — nothing else, and nothing less.

Configure yours Join the waitlist